Overview
Water heaters tend to get attention only when something goes wrong: no hot water, water that runs lukewarm, strange popping noises, a pilot light that will not stay lit, or a puddle forming around the base of the tank. Some of those problems are minor repairs. Others, especially a leaking tank, usually mean the unit is at the end of its life.
Most homes have either a storage tank water heater, which keeps a supply of hot water ready, or a tankless unit that heats water on demand. Both may run on natural gas, propane or electricity, and some homes use heat pump water heaters. The type you have affects which parts can fail and what a repair involves. Gas units have burners, thermocouples or flame sensors and venting; electric units have heating elements and thermostats; tankless units have heat exchangers that may need periodic descaling, especially with hard water.
Because water heaters combine water, heat and, in many cases, combustion gases, safety components matter. The temperature and pressure relief valve is designed to open if pressure or temperature becomes dangerous, and gas units must vent exhaust properly. If you smell gas, notice soot, or see the relief valve discharging, treat it as urgent and keep the area clear.
What the work usually involves
- Checking safety items. Venting, gas connections, the relief valve and its discharge line are typically checked during a visit.
- Repairing components. Thermocouples, igniters, elements, thermostats and valves can often be replaced without replacing the unit.
- Identifying the unit. The plumber will note the type, fuel, capacity and approximate age, which is often printed on the label or encoded in the serial number.
- Installation details. Replacement may involve updating venting, expansion tanks, seismic or other strapping, drain pans or gas lines depending on local code.
- Diagnosing the symptom. No hot water, not enough hot water, discolored water and noise each point to different components.
What affects the outcome
- A leaking tank usually cannot be repaired. Leaks from fittings or valves often can, so it helps to know exactly where the water is coming from.
- Age is a factor in repair decisions. Putting a significant repair into a unit near the end of its expected life may not be the best value.
- Sizing matters. A replacement that is too small for the household may run out of hot water; tankless units are sized by flow rate rather than tank volume.
- Hard water affects lifespan. Sediment in tanks and scale in tankless heat exchangers reduce efficiency over time, and periodic flushing may be recommended.
- Switching types can involve extra work. Moving from tank to tankless, or gas to electric or heat pump, may require new venting, gas line sizing or electrical capacity.
- Utility or manufacturer rebates sometimes apply to high-efficiency units. Programs change, so check current availability.
Local notes for Colorado Springs
Colorado's Front Range sees sharp temperature swings in winter, and hard freezes can follow mild days. Pipes in exterior walls, garages and crawl spaces are the most exposed, and outdoor hose bibs that are not freeze-resistant or disconnected from hoses are a common trouble spot.
Water in much of Colorado is moderately hard to hard depending on the source, which can contribute to scale in water heaters and fixtures over time. Your local water utility publishes water quality reports if you want specifics.
We take inquiries from Colorado Springs, Monument, Fountain, Manitou Springs, Security-Widefield.
Before you send an inquiry
- If you have had related work done recently, note the date and what was done.
- Say whether you own or rent. Renters usually need to involve the landlord or property manager before work begins.
- Tell us if the issue is affecting your only bathroom or your only source of hot water, which changes how urgent it is.
- Mention the approximate age of the home and whether you know what type of piping it has, such as copper, PEX, galvanized steel or cast iron.
- Find your main water shut-off before you need it, and mention in your inquiry whether you have already shut the water off.
Red flags to watch for
- Unwillingness to provide license or insurance information when asked.
- Prices that change significantly after arrival without a clear explanation of what was discovered.
- Vague answers about the cause of the problem, or no plan to confirm that the fix worked.
- Requests for large cash payments up front before any work or materials are scheduled.
- Pressure to decide immediately on a large replacement without a clear explanation of why a repair will not work.
Questions to ask a provider
- Based on the symptom, do you think this is a repair or a replacement?
- How old is my unit, and how does that affect your recommendation?
- Will you pull a permit for a replacement if one is required?
- What size and type of unit would fit my household, and why?
- Is haul-away of the old unit included?
- Are there code updates, like venting, expansion tanks or strapping, that the new install would need?
- Do you service tankless units and descale them?
Common questions
- Why is my water heater making popping sounds?
- In tank units, popping or rumbling is often caused by sediment on the bottom of the tank. A plumber can tell you whether flushing would help or whether the buildup is significant.
- Why does my hot water run out quickly?
- Possible causes include a failing heating element or burner issue, a broken dip tube, sediment, or a unit that is undersized for current household use.
- Is a tankless water heater always better?
- Not always. Tankless units provide continuous hot water and take less space, but they have different upfront costs, venting and gas requirements, and maintenance needs. The right choice depends on your home and usage.
Related topics
- Sump Pump Issues: How sump pumps work, common failures, backup options and what to ask a plumber about repair or replacement.
- Burst and Leaking Pipes: What happens when a pipe bursts or starts leaking, what to do first, and what to ask an emergency plumber before work begins.
- Leak Detection: How plumbers find hidden water leaks, signs you might have one, and questions to ask before testing begins.